Agilent Technologies E5071C - Page 2636

Programming
2863
:SENSe:CORRection:COLLection:DLComp:SAVE
Type
Command Only
Syntax
:SENSe:CORRection:COLLection:DLComp:SAVE
Description
This command saves the result of Loss Compensation sequence.
Examples
10 OUTPUT 717;":SENS:CORR:COLL:DLC:SAVE"
Related Commands
:SENSe:CORRection:COLLection:DLComp:OPEN
:SENSe:CORRection:COLLection:DLComp:LOAD
:SENSe:CORRection:COLLection:DLComp:THRU
Equivalent GUI
Setup > Deskew & Loss Compensation (under Basic) > Measure > Port 1
and/or Port 2 and/or Port 3 and/or Port 4 > Apply