E5071C
282
1. Press Channel Next/Channel Prev keys and Trace Next/Trace Prev to
activate the trace on which the discrete mode is set up.
2. Press Marker Fctn key.
3. Click Discrete to turn the discrete mode on or off.
Setting up Markers for Each Trace/Setting up Markers for Coupled
Operation between Traces
Makers can be set up and moved either in coupled operation for all traces in
a channel or independently for each trace.
Value Description
Marker Couple
is on
(Coupling ON)
Markers are set up and moved in coupled operation on
all traces in a channel.
Marker Couple
is off
(Coupling OFF)
Markers are set up and moved independently for each
trace.
Turning Marker Coupling On or Off
1. Press Channel Next/Channel Prev keys to activate the channel on
which the marker couple will be set.
2. Press Marker Fctn key.
3. Click Couple to turn the marker coupling on or off.
Listing all Marker Values in all Displayed Channels
To Next Page
Loading...
Need help?
General
