Product Information
769
unleveled range.
For example, if the level after correction
exceeds the power level that can be
outputted when correcting the power
level with the power calibration and
power slope feature, this error occurs.
Check that the power level is set
correctly, the power calibration has been
performed correctly and the correction
value of the power slope is set correctly.
120 Printer error
This error occurs when the previous
printing is still in progress or the printer
fails (offline, short of paper, etc.) at time
of outputting the display image on the
LCD screen to the printer (HCOP:IMM
command).
121 Print failed
This error occurs when printing fails for
reasons other than Error 120, Printer
error.
-284
Program
currently
running
This error occurs when the
PROG:SEL:STAT RUN command is
executed with the VBA program in the
Run state.
-112
Program
mnemonic too
long
The length of the header exceeds 12
characters (see 7.6.1.4.1, IEEE488.2).
-286
Program
runtime error
An error occurring when VBA is executed.
Q
No. Message Description
-430
Query
DEADLOCKED
The state that generates a
"DEADLOCKED" Query error (see
6.3.1.7, IEEE488.2). This error occurs
when both input and output buffers
have become full, preventing the
instrument from continuing processing,
for example.
To Next Page
Loading...
Need help?
General
