E5071C
1004
:DISP:WIND{1-36}:TRAC{1-36}:Y:AUTO
Displaying a message in the echo window
You can display a message in the echo window by issuing the following
command:
:DISP:ECHO
You can clear any message displayed in the echo window by issuing the
following command:
:DISP:ECHO:CLE
Turning On/Off display update
To turn on/off the update of the LCD screen, use the following command:
:DISP:ENAB
Showing/hiding frequencies
To show or hide frequencies on the LCD screen, use the following
command:
:DISP:ANN:FREQ
Showing or hiding the title
To show or hide the title, use the following command:
:DISP:WIND{1-36}:TITL
To define the title string that appears in the title display area, use the
following command:
:DISP:WIND{1-36}:TITL:DATA
Configuring date/time display
To show or hide the current date and time on the right-hand side of the
instrument status bar, use the following command:
:DISP:CLOC
To set the date and time, use the following command:
:SYST:DATE
:SYST:UPR
Turning On/Off the LCD backlight
To turn on/off the LCD backlight, use the following command (note that
turning off the backlight makes the screen unreadable):
To Next Page
Loading...
Need help?
General
