Agilent Technologies E5071C - Page 847

E5071C
1074
Setting Gate Shape
To select the gate shape, use the following command:
:CALC{1-36}:FILT:TIME:SHAP
Setting Gate Range
To set the gate range, use the following commands:
Description Command
Start value
:CALC{1-36}:FILT:TIME:STAR
Stop value
:CALC{1-36}:FILT:TIME:STOP
Center value
:CALC{1-36}:FILT:TIME:CENT
Span value
:CALC{1-36}:FILT:TIME:SPAN
Sample Program
See the Time Domain.