Programming
1129
6 Trace 6 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the limit
test result for trace 6.
7 Trace 7 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the limit
test result for trace 7.
8 Trace 8 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the limit
test result for trace 8.
9 Trace 9 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the limit
test result for trace 9.
10 Trace 10 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the limit
test result for trace 10.
11 Trace 11 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
measurement cycle finishes
and returns "fail" as the limit
test result for trace 11.
12 Trace 12 Limit Test Fail
Set to "0" when a
measurement cycle begins;
set to "1" when the
To Next Page
Loading...
