Cypress EZ-USB FX3 User Manual

EZ-USB FX3 Technical Reference Manual, Document Number: 001-76074 Rev. *F 159
General Programmable Interface II (GPIF II)
Figure 7-46. FLAGA Settings
Figure 7-47 shows the FLAGB settings.
Figure 7-47. FLAGB Settings
The WaterMark value needs to be set using the CyU3PGpifSocketConfigure API. With this API, the active socket for each
thread and its properties can be selected by the user at run time.
Figure 7-48 shows the FLAGC settings.

Cypress EZ-USB FX3 Specifications

General

Brand	Cypress
Model	EZ-USB FX3
Category	Controller
Language	English