6 FUNCTIONS OF THE OPERATION SCREENS CCW-R-2**B INSTRUCTION MANUAL
6-20
6.3.4.3 Switching to [Installation] Level
To switch the [Operator] level or the [Site Engineer] level to the [Installation] level, the password for the
[Installation] level is required.
For switching to the [Installation] level, follow the procedures below.
1. In the [Main Menu] screen, press the
[Operation Level Selection] drop-down key
.
X The [Operation Level Selection] drop-down
list appears.
Fig.6-19 [Main Menu] Screen
2. Press [Installation].
X The [Password Input Keyboard] screen
appears.
3. Enter the password for the [Installation] level.
X The [Main Menu] screen for the
[Installation] level appears.
Fig.6-20 [Operation Level Selection] Drop-down List