ISHIDA CCW-R-2 B Series - Selecting and Initializing Preset

CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-137
6.15.3.2.3 Selecting and Initializing Preset
This section describes the procedure to initialize specific preset data.
For initializing preset, the copy source preset list is used.
X The all preset copy is completed.
Fig.6-145 [Preset Manager] Tab Screen
([Display & Data Manager] Screen)
1. Press the [Source] drop-down key and
select the media to be initialized from the
following: [C1 Memory], [C2 Memory], [C1
Card] or [C2 Card].
Fig.6-146 [Preset Manager] Tab Screen
([Display & Data Manager] Screen)
2. From the copy source preset list, press the
preset number to be initialized.
X The selected copy source preset item is
displayed in blue.
Fig.6-147 [Preset Manager] Tab Screen
([Display & Data Manager] Screen)