ISHIDA CCW-R-2 B Series - Reducing Product Change Time; Using Feeder Adjustment of Drain Function

CCW-R-2**B INSTRUCTION MANUAL 7 USEFUL FUNCTIONS
7-7
7.3 Reducing Product Change Time
This section describes how to discharge remaining products more quickly in order to reduce time for
product change after weighing is completed.
7.3.1 Using Feeder Adjustment of Drain Function
Remaining products can be discharged using the drain function.
For the drain function setting, follow the procedures below.
1. On the [Main Menu] screen, press the [Drain]
key .
X The [Drain] screen appears.
X The drain starts.
Fig.7-14 [Main Menu] Screen
2. Press the [Feeder Adjust] tab.
X The [Feeder Adjust] tab screen appears.
Fig.7-15 [Drain] Screen