CCW-R-2**B INSTRUCTION MANUAL 2 INTRODUCTION
2-1
2 INTRODUCTION
2.1 Summary
This chapter describes the terms specifically used in this instruction manual, each head condition,
components of the device, and operation outline.
Note that this instruction manual is composed based on the device equipped with the software of the
following program numbers:
• DMU: PROGRAM No. T0076H
• RCU: PROGRAM No. W0032Y
<Contents>
• Usage, features, and specifications of the device
• Descriptions of the terms used in this manual
• Components of the device and operation outline
<Purpose>
To understand the basic components, outline, usage, application range, and application limit of the
device.
<Intended reader>
• All users
2.2 Intended Use of the Device
This device is intended to weigh and adjust product weight to a set value through computer-controlled
combinational weighing.
The device can be used as a weighing instrument for a wide range of products from food such as snacks
and candies to machine parts. *1
*1 Application should be limited to products approved by Ishida Co., Ltd. for design reasons.
To Next Page
Loading...
