ISHIDA CCW-R-2 B Series User Manual

12 INSTALLATION CCW-R-2**B INSTRUCTION MANUAL
12-4
12.3.2 Precaution for Lifting
When lifting the weighing machine, observe the following items.
• For the weight of the weighing machine, refer to the specifications issued at the order.
For the weight when the optional specifications are additionally installed, contact the
distributor or Ishida customer support.
1. Take into account the weight of the weighing machine, and the center of gravity when lifting.
2. Select the lifting equipment within the safety load limit in accordance with the weight of the
weighing machine.
3. Check items before lifting
• There should be no twist or damage on the wire ropes.
• The wire ropes should have a sufficient length.
• The eyebolts should be securely installed.
4. Check items during lifting
• Only a licensed personnel should perform the slinging work and operate a lifting weighing
machine.
• Select and use an appropriate lifting weighing machine in accordance with the load weight.
• Apply patches or cloth for the protruding parts and edges in order to avoid damage to the weighing
machine.
• When starting the lifting work, give a sign to the other workers on the site.
• Check the inclination and balance of the load while lifting the weighing machine.
• Check the conditions of the lifting equipment and wire ropes while lifting the weighing machine.
5. Precautions for moving while lifting
• Stay out from under the load.
• Do not move the lifted load above the aisles.
6. Precautions for unloading
• Remove objects from the unloading area, and observe the specified lifting point and slinging
methods.

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English