ISHIDA CCW-R-2 B Series User Manual

CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-37
6.7 [Production] Screen
To display the [Production] screen, press the [Start] key in any screen.
• When the [Start] key is pressed, the feeders and hoppers start to move.
Perform a safety check around the device before pressing the key.
• The [Start] key cannot be pressed when the control power is off. Press the [Power] key to turn
on the control power.
• The [Start] key cannot be pressed while presetting. After setting is completed, press the
[Exit] key to accept the preset.
• DO NOT, UNDER ANY CIRCUMSTANCES, CLOSE THE HOPPERS WITH
HANDS OR TOOLS. Doing so may damage the drive unit.
• When the main power switch is turned OFF while the hoppers are open, or
when the hoppers remain open due to an electrical power failure, follow the
procedures described in “4.9 Handling Drive Unit” for the corrective action.

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English