ISHIDA CCW-R-2 B Series User Manual

6 FUNCTIONS OF THE OPERATION SCREENS CCW-R-2**B INSTRUCTION MANUAL
6-146
6.15.3.3.4 Initializing All Machine Setting Items
This section describes the procedure to initialize all machine setting data.
For initializing all items, the copy source machine setting item list is used.
• If initialization is performed, all the machine setting data is lost. Before performing
initialization, make sure that it will cause no problems.
3. Press the [Initialize] key .
X The confirmation message screen appears.
4. Press the [Yes] key .
X The selected machine setting item is
initialized.
Fig.6-162 [Machine Set Mngr] Tab Screen
([Display & Data Manager] Screen)
1. Press the [Source] drop-down key and
select the media to be initialized between
[Memory] and [Card].
• If copy destination media is changed,
copy source media is also changed.
If not noticing this, media that is not to
be initialized may be initialized.
To prevent accidental deletion of data,
do not use the [Destination] drop-down
key.
Fig.6-163 [Machine Set Mngr] Tab Screen
([Display & Data Manager] Screen)

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English