ISHIDA CCW-R-2 B Series User Manual

CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-143
6.15.3.3.2 Copying All Machine Setting Items
This section describes the procedure to copy all the machine setting items registered in the memory or
card.
In all preset copy, data is copied from memory to card or from card to memory.
• If all the preset data is copied, original data is overwritten by the copied data and is lost.
3. Press the [Copy] key .
X The confirmation message screen appears.
4. Press the [Yes] key .
X The selected machine setting item is copied.
Fig.6-156 [Machine Set Mngr] Tab Screen
([Display & Data Manager] Screen)
1. Press the [Source] drop-down key and
select the copy source between [Memory] and
[Card].
It is also possible to press the [Destination]
drop-down key and select the copy destination
between [Memory] and [Card].
Fig.6-157 [Machine Set Mngr] Tab Screen
([Display & Data Manager] Screen)

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English