EasyManua.ls Logo

ISHIDA CCW-R-2 B Series - Specifications of the Device; Standard Specifications; Outside Dimension; Operation Environment

ISHIDA CCW-R-2 B Series
492 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CCW-R-2**B INSTRUCTION MANUAL 2 INTRODUCTION
2-3
It is also possible to use the device as a double mix weigher by setting the device as a double weigher and dividing
each weigher into two sections.
2.4 Specifications of the Device
This section describes the specifications of the device. Understand the details of this section thoroughly
before operating the device.
2.4.1 Standard Specifications
For the specifications of your own device, refer to the separately attached specifications.
For standard specifications, refer to the product catalogue.
2.4.2 Outside Dimension
For the outside dimensions of your own device, refer to the separately attached drawing.
Design and outside dimensions are subject to change without notice.
2.4.3 Operation Environment
Use the device within the operation environment below in order to operate the device effectively and
maintain precision as well as to perform weighing safely:
Indoors
Ambient temperature between 0 and 40 deg C
Ambient relative humidity between 35% and 85% (No condensation allowed)
Steady location without floor vibration, where the device can be horizontally stable
Sufficient maintenance space around the device
No source of radio interference or radio equipment in the vicinity

Table of Contents

Related product manuals