ISHIDA CCW-R-2 B Series User Manual

7 USEFUL FUNCTIONS CCW-R-2**B INSTRUCTION MANUAL
7-2
7.2 New Product Registration by Using Registered
Product Data
This section describes how to register new products by using registered product data.
7.2.1 Copying C1 Product Data to C2
When using this device in the double mode, the product data registered in C1 can be copied to C2 for use.
To copy product data, follow the procedures below.
1. On the [Main Menu] screen, press the [Machine
Set] pop-up key .
X The [Machine Set] pop-up menu appears.
Fig.7-1 [Main Menu] Screen
2. Press [Display & Data Manager].
X The [Display & Data Manager] screen
appears.
3. Press the [Preset Manager] tab.
X The [Preset Manager] tab screen appears.
Fig.7-2 [Machine Set] Pop-up Menu

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English