ISHIDA CCW-R-2 B Series - Using Full Open Lock Function

7 USEFUL FUNCTIONS CCW-R-2**B INSTRUCTION MANUAL
7-8
7.3.2 Using Full Open Lock Function
Products of a size that cause no jam in a hopper or collection chute can be discharged using the full open
lock function.
For the full open lock function setting, follow the procedures below.
3. Press the [RF Time] lamp key and the
[RF AMP] lamp key to select the
operation time and operation amplitude, and
press the [Increase] key to set a larger
value for each setting.
• Setting a larger value can discharge products
faster.
• Set the maximum value so that no
product jam will occur in the collection
chute or packer.
• Feeder values changed during drain are
not reflected in the preset.
Fig.7-16 [Feeder Adjust] Tab Screen ([Drain] Screen)
1. On the [Main Menu] screen, press the [Full
Open] key .
X The [Full Open Lock] screen appears.
Fig.7-17 [Main Menu] Screen