ISHIDA CCW-R-2 B Series - Display & Data Manager] Screen; Layout Setting] Tab Screen

CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-131
6.15.3 [Display & Data Manager] Screen
To display the [Display & Data Manager] screen, select [Display & Data Manager] in the [Machine Set]
pop-up menu.
The [Display & Data Manager] screen is used for layout setting, preset editing and machine
configuration editing. Select the screen to be displayed with the tab.
6.15.3.1 [Layout Setting] Tab Screen
The layout setting screen is used to set the display method in accordance with the location of the remote
control unit.
Fig.6-133 [Layout Setting] Tab Screen ([Display & Data Manager] Screen)
Table 6-63 Items and Functions of the [Layout Setting] Tab Screen
No. Name Function
1 [Head No 1 Location Setting] key Sets the head to be displayed as head 1 seen from the remote control unit
position.
Each hopper illustration can be used as a key and is displayed in blue if
pressed.
With this setting, you can adjust the weigher visually.
2 [C1 Weight Display Position] radio
button
Sets whether to display C1 combination result with the remote control unit on
the left or on the right.