CCW-R-2**B INSTRUCTION MANUAL 12 INSTALLATION
12-21
12.5.3 Changing the Operation Level
Change to the [Installation] level in accordance with the following procedures.
1. Press the [Operation Level Selection] key
.
X The [Operation Level Selection] menu
appears.
Fig.12-21 [Main Menu] Screen
2. Press [Installation].
X The [Password Input Keyboard] screen
appears.
3. Enter the password.
XThe [Main Menu] screen for the [Installation]
level appears.
• The factory default password set for the
[Installation] level is “2”.
• The entered password is displayed as
“*”.
Fig.12-22 [Operation Level Selection] Drop-down List
To Next Page
Loading...
