CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-31
6.4 [Main Menu] Screen
The [Main Menu] screen appears first when the main power switch is turned ON.
• The figure below shows the screen with the operation level switched to the [Installation]
level after the main power switch is turned ON. The system normally starts up on the
[Operator] level setting.
Fig.6-39 [Main Menu] Screen (Double Weigher, C1 + C2)
• Different channels are displayed depending on the weigher selection status.
When only C1 is operating or the device is operated as a mix weigher, the preset for C2 is
not displayed.
When only C2 is operating, the preset for C1 is not displayed.
Table 6-8 Items and Functions of [Main Menu] Screen
No. Name Function
1 [Zero Adjst] key Displays the [Zero Adjustment] screen.
( 6.6 [Zero Adjustment] Screen)
2 [Drain] key Displays the [Drain] screen.
( 6.8 [Drain] Screen)
To Next Page
Loading...
