ISHIDA CCW-R-2 B Series User Manual

CCW-R-2**B INSTRUCTION MANUAL 9 CLEANUP PROCEDURES
9-1
9 CLEANUP PROCEDURES
9.1 Summary
This chapter describes cleaning procedures for each component.
Clean the components properly, depending on weighed product types and dirt conditions.
Before cleaning, drain any weighed products remaining in the device.
( 6.8 [Drain] Screen)
• When cleaning each component, the operator must turn OFF and lock the
main power switch, and keep the key in his possession during the work.
<Contents>
• Cleaning procedures and cycle of the components
<Purpose>
To understand installation, removal, and cleaning procedures of the components in order to prevent
foreign matter from entering the product and to maintain the hygiene of the device.
<Intended reader>
• Operators
• Maintenance engineers

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English