CCW-R-2**B INSTRUCTION MANUAL 1 SAFETY PRECAUTIONS
1-5
1.4 Special Precautions
This section describes the precautions which need to be observed for safe operation, specifically for this
device. Follow the special precautions below along with the general precautions.
When cleaning the device, the operator must turn OFF and lock the main power
switch and keep the key in his possession during the work.
This is to prevent other personnel from starting the device, which may cause an
electrical shock or injury.
Do not share the power source with other devices that may emit noises.
Failure to do so may cause malfunction or damage to the device.
Do not place any foreign matter such as insecticide or liquid inside the protected
portions including the device main body, terminal boxes, and motor boxes.
Doing so may cause malfunction or damage to the device.
Do not apply an excessive load to the weigh hopper.
Doing so may damage the weighing portion.
Route the wiring in the way that power voltage fluctuation due to load change does
not exceed ±10%.
Failure to do so may cause malfunction or damage to the device.
Depending on food materials such as raw meat and cut vegetables, the risk of an
unhygienic condition may occur through the usage of the device.
Clean the device properly depending on product type and processing methods. For
cleaning methods, read and thoroughly understand Chapter 9 and follow the
instructions.
When the specification of your machine is WP(waterproof), do not turn off the air
supply power. This maintains the supply of dry air to the main body of the machine.
Failure to do so may cause condensation and erosion.
To Next Page
Loading...
Need help?
General
