1 SAFETY PRECAUTIONS CCW-R-2**B INSTRUCTION MANUAL
1-6
1.5 Warning Label
Warning labels are attached at the locations that require special cautions. Take sufficient time to
familiarize yourself with the detailed locations and precaution details of these labels.
1.5.1 Warning Label Handling
Check if all the warning labels are legible. If any letters or illustrations are unclear, clean or replace such
labels.
Clean the warning labels using a cloth, water, and neutral detergent.
Do not use organic solvents or gasoline.
If the warning labels are damaged, lost, or illegible, replace the labels.
Check the machine type (model) and machine identification, and contact the distributor or Ishida
customer support.
1.5.2 Attached Locations of Warning Labels
The locations of attached warning labels are shown in Figure 1-1 Attached Locations of Warning Labels.
Fig.1-1 Attached Locations of Warning Labels
Table 1-2 Attached Locations of Warning Labels
No. Attached Location Precaution Detail
1 Front and back of the device Electrical shock
2 Two drive units Electrical shock