ISHIDA CCW-R-2 B Series - Outline of the Production

CCW-R-2** Ｂ INSTRUCTION MANUAL 4 OPERATION PROCEDURES
4-3
4.3 Outline of the Production
This section describes the outline of the production.
Refer to “4.4 Production Procedures” and the subsequent sections for details regarding production
procedures.
4.4.1 Pre-start Inspection
↓ ↓
4.4.2 Air Pressure Adjustment (WP specification) ↓
↓ ↓
4.4.3 Turning the Device Power Switch ON
↓
4.4.4 Turning the Control Unit Power Switch ON
↓
4.4.5 Selecting the Machine Mode
↓↓
(Normal Operation) 4.4.6 Start-up Assistant Function
↓
↓
4.4.7 Preset Selection ← 4.4.7 Preset Selection
↓↓
4.4.8 Zero Adjustment ← 4.4.8 Zero Adjustment
↓↓
4.4.9 Starting the Production 4.4.9 Starting the Production
↓↓
4.4.10 Stopping the Production
↓
4.4.11 Discharging the Products
↓
4.4.12 Turning the Device Power Switch OFF
↓
Cleaning