ISHIDA CCW-R-2 B Series User Manual

12 INSTALLATION CCW-R-2**B INSTRUCTION MANUAL
12-20
12.5.2 Turning the Power ON
• Before connecting to the plant power terminal, use a tester to check if the
power specifications of the weighing machine match with the plant power
supply.
When power of different specifications is accidentally supplied, serious
damage to the weighing machine may occur.
Turn the power ON in accordance with the following procedures.
Connect the power outlet, and turn the main power switch next to the remote control unit ON. The [Main
Menu] screen of the [Operator] level is displayed automatically.
1. Check the wiring of terminal block PS-0.
2. Check that the breaker is ON.
• Keep the breaker inside the main body
ON all of the time.
3. Turn ON the main power switch of the factory
side, and turn ON the main power switch next
to the remote control unit.
X The [Main Menu] screen appears.
Fig.12-19 Main Power Switch
4. Press the [Power] key .
X The power will be supplied to the hopper
drive circuit and feeder drive circuit.
Fig.12-20 [Main Menu] Screen
MAIN POWER SWITCH

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English