ISHIDA CCW-R-2 B Series User Manual

11 CAUSES AND ACTIONS FOR ERRORS AND FAILURES CCW-R-2**B INSTRUCTION MANUAL
11-16
11.2.9 Error Clear and Action
When an error occurs, follow the procedure described below to eliminate the cause of the error and to
clear the error display.
This section describes the [Power] key, [Err Clr & Stop] key and [E Clr & Restrt] key displayed in the
error screen of patterns 1 and 2.
These keys are used to clear the errors of patterns 1 and 2 as shown below.
Error clear and action
Clearing error by using the [E Clr & Restrt] key:
Method for restarting the operation after removing the cause of the error.
Clearing error by using the [Err Clr & Stop] key:
Method for stopping the operation after removing the cause of the error.
Clearing error by using the [Power] key:
Method for forcibly clearing the error when the cause of the error cannot be removed or when the error
cause is unknown and the error repeatedly occurs even after the error clear operation is performed.

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English