CCW-R-2**B INSTRUCTION MANUAL 10 MAINTENANCE AND INSPECTION
10-1
10 MAINTENANCE AND INSPECTION
10.1 Summary
This chapter describes the maintenance and inspection procedures in order to maintain the weighing
machine in good condition.
• For maintenance and inspections, unless instructed, the operator must turn
OFF and lock the main power switch, and keep the key in his possession
during the work.
<Contents>
• Daily inspection and periodical inspection
• Adjustment of components
<Purpose>
• To understand the inspection and adjustment procedures for the components in order to maintain the
weighing machine in good condition and prevent loss of production.
<Intended reader>
• Operators
• Maintenance engineers
To Next Page
Loading...
