ISHIDA CCW-R-2 B Series - Emergency Stop and Restart

4 OPERATION PROCEDURES CCW-R-2** Ｂ INSTRUCTION MANUAL
4-2
4.2 Emergency Stop and Restart
Perform the following procedures when stopping the device in the event of an emergency and then
restarting it.
Emergency stop procedures
Restart procedures
1. Eliminate the cause of the emergency stop.
2. Restart the production using normal procedures.
1. Turn OFF the main power switch on the side of
the remote control unit.
XProduction is terminated.
XThe display of the control panel disappears.
Fig.4-1 Main Power Switch
MAIN POWER SWITCH