ISHIDA CCW-R-2 B Series User Manual

CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-39
• [Write feeder OptimumVal] is available to [Site Engineer] or higher level personnel.
6 [CH.Select] pop-up key Selects the machine mode.
7 [Write feeder OptimumVal] key Registers the feeder value currently set.
The registered feeder value can be called using [Read OptimumVal] in the
preset screen.
8 [Infeed Control] key Selects whether to stop or to automatically control product infeed to the
device.
Each time the key is pressed, the lamp turns on and off in turn.
When the lamp is on, automatic product infeed to the device is performed.
When the lamp is off, automatic product infeed to the device is stopped.
9 [Exit] key Returns to the [Main Menu] screen.
Cannot be used while the weigher is in operation.
10 [Sample Discharge] pop-up key Selects the section to discharge samples. (Mix weigher only)
( 7.5 Comparing Values on Remote Control and Actual Values)
Table 6-11 Items and Functions of [Production] Screen(Continued)
No. Name Function

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English