ISHIDA CCW-R-2 B Series - Page 253

CCW-R-2**B INSTRUCTION MANUAL 6 FUNCTIONS OF THE OPERATION SCREENS
6-141
• Some of the machine setting items cannot be set by the user. Especially in initialization, pay
careful attention in selecting items.
• If items that cannot be set by the user are initialized by accident, please contact Ishida service
center.
Table 6-66 Machine Set Manager Items
No. Machine Selection Item
1 [Weigh Spec Setting]
2 [Combination Set]
3 [Section Set]
4 [Infeed Control Setting]
5 [Packer Interlock Setting]
6 [H DRV Spec Setting]
7 [FD Spec Setting]
8 (Not used)
9 [AFV Setting]
10 (Not used)
11 [Network setting]
12 [Input Output setting]
13 [Auto timing setting]
14 [Drive Count]
15 [Option setting]
16 [AFD Setting]