6 FUNCTIONS OF THE OPERATION SCREENS CCW-R-2**B INSTRUCTION MANUAL
6-162
7 [Feed Intrpt.] key Sets the time to judge that product infeed from the infeeder to the device is
interrupted.
If product shortage is detected even after the set time has passed, it is judged
as interrupted product infeed, and the device stops production, displaying the
message “Low Product”.
When not performing automatic stop, set “0”.
Setting range: 0-255 sec.
Table 6-78 Items and Functions of [Infeedr Cntl Set] Tab Screen(Continued)
No. Name Function
To Next Page
Loading...
