ISHIDA CCW-R-2 B Series User Manual

CCW-R-2**B INSTRUCTION MANUAL 2 INTRODUCTION
2-7
12 Timing hopper (TH)
(Optional)
Temporarily pools products passed through the discharge chute and discharges them in
accordance with the request from the following processing device such as the packer.
13 Timing hopper drive unit
(Optional)
Activates open/close of the timing hopper.
14 Remote control unit
(RCU)
Performs operation and required setting of the device.
15 Printer Prints out the total information, including the weighing result.
16 Main power switch Turns on/off the power supply to the device.
17 Air Dryer Supplies dry air to the inside of the main body.
Table 2-2 Descriptions of Components (Continued)
No. Name Function and Description

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English