ISHIDA CCW-R-2 B Series User Manual

OBJECTIVES AND ORGANIZATION OF THIS MANUAL
(4)
OBJECTIVES AND ORGANIZATION OF THIS MANUAL
1. Purpose of this manual
This manual is designed to provide users with information about the operation, maintenance,
inspection, and installation of the Ishida CCW-R series circular booster type computer weigher.
2. How to use this manual and how this manual is organized
Chapters 1 through 4 contain basic information such as safety consideration, structure, and the
operation of this device. From chapters 5 and on, more technical information is presented, such as
detailed description of the device functions, including various data settings, and maintenance and
inspection procedures. In order to acquire information which is necessary for your service, personnel
involved in daily production using this device should read the early chapters, and personnel involved
in management of the production line or maintenance of the device should read all chapters
thoroughly.
The organization of this manual, the contents of each chapter, and the intended readers are described
in the table below. All personnel involved in operations with the equipment should select the
required information to make effective use of this manual.
The definition for each intended reader described in the table below is as follows:
• Operator: Personnel who perform basic operations
during daily production with the production
line (i.e., operator level operations).
Do not perform any work in this manual
that is targeted to any personnel other than
Operators.
• System administrator: Personnel who, in addition to the operator
level operations, perform registration for
weighing and adjustment operations (i.e.,
administrator level operations).
Do not perform any work in this manual
that is targeted to maintenance engineers or
Ishida service engineers.
• Maintenance engineer: Personnel with specialized knowledge about
the equipment who perform maintenance or
inspection of the equipment (i.e. installation
level operations).
Do not perform any work in this manual
that is targeted to Ishida service engineers.
• Ishida Service engineer:Personnel who, in addition to the system
administrator level operations, perform
tuning when installing the equipment.
Unless otherwise noted, there is no
limitation in performing any operation
described in this manual.
Note

ISHIDA CCW-R-2 B Series Specifications

General

Brand	ISHIDA
Model	CCW-R-2 B Series
Category	Industrial Equipment
Language	English