Matrix ETERNITY NE System Manual 121
DDI Routing
1. Click [+] to expand options.
2. In the field DDI Number for SIP Trunk 1, enter the DDI number you want to assign to this DKP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 1.
3. In the field DDI Number for SIP Trunk 2, enter the DDI number you want to assign to this DKP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 2.
4. In the field DDI Number for SIP Trunk 3, enter the DDI number you want to assign to this DKP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 3.
5. In the field DDI Number for SIP Trunk 4, enter the DDI number you want to assign to this DKP extension
from among the DDI numbers provided by the ITSP with whom you have registered SIP Trunk 4.
6. To allow the system to land incoming calls with the same DDI number on this DKP extension, keep Allow
Incoming DDI Calls enabled. Default: Enabled.
Clear check box only if you want to disable.
7. To allow the system to send the DDI number as CLI when outgoing calls are made from this DKP
extension, keep Send DDI Number as CLI enabled. Default: Enabled.
If you clear the check box, the system will send the MSN number as CLI of outgoing calls made from this
extension.
SMDR Storage
The Station Message Detail Recording (SMDR) feature of ETERNITY enables you to record the details of Internal,
Incoming (IC) and Outgoing (OG) calls made from/to all its extensions. To obtain SMDR as a report, you must
enable SMDR Storage, and set filters. See “Station Message Detail Recording (SMDR)” to know more.
To Next Page
Loading...
