218 Matrix ETERNITY NE System Manual
• Double click the Extensions field. A new window opens.
• Select the extension numbers as landing destination. These may be SLT, DKP or SIP extensions.
• Set the Ring Timer for the extensions. This timer defines the time for which the extension, on which
the call lands, should ring. Default: 015 seconds.
•Set Continuous Ring
63
for the extensions, if you want the extensions to ring till the incoming call is
answered. Default: Disabled.
• Enable Rotation
64
, if you have selected more than one extension. Default: Disabled.
• Click OK. All the extensions you selected will appear in the Extension field, in the sequence you
selected, separated by commas.
• To route the incoming call to an auto attendant, if the selected extensions do not answer the call,
63. When Continuous Ring is selected, the first extension in the group you have created will continue to ring, even as the system hunts
for other extensions in the group to land the call. If the call still remains unanswered, the system will return the call to the first exten-
sion once again. This flag has no relevance, if you select only one landing extension.
64. When Rotation is enabled, each new call lands on the extension next to the one that received the call last. This ensures equal dis-
tribution of incoming calls to all the destination extensions in this group.
To Next Page
Loading...
