222 Matrix ETERNITY NE System Manual
Automatic Number Translation
The Automatic Number Translation feature of ETERNITY modifies dialed numbers or part thereof to match the
specific route numbering plan understood by the destination network—PSTN, GSM, VoIP—by adding or stripping
country and area codes.
For example, you can configure Automatic Number Translation such that when an extension user dials a local
landline number, the ETERNITY prefixes the number with the appropriate country-area code when it routes the call
through the GSM network. To know more about this feature, see the description for “Automatic Number
Translation”.
To apply Automatic Number Translation (ANT) on the trunk,
1. Click [+] Automatic Number Translation to expand.
2. Select the desired ANT Table number, table 1 to 8, which you want to apply on the trunk. Default: OFF.
3. Configure the ANT table number you selected.
4. Click ANT link. A new window opens.
5. Click the Table Number you selected for this trunk.
The selected table appears on your screen.
The table has two columns: one for Dialed Number Strings and the other for the corresponding Substitute
Number strings. The number strings are stored against an Index number, from 1 to 32. You can to enter as
many as 32 number strings.
6. Enter the Dialed Number strings and their corresponding Substitute Number strings in the respective
columns, against the same Index numbers. For example, if '95' is entered as the Dialed Number at Index
01 and its Substitute Number '91' must be entered at Index 01.
7. Click Submit to save your entries.
8. Close the window.
SMDR Storage
The Station Message Detail Recording (SMDR) feature of ETERNITY enables you to record the details of Internal,
Incoming (IC) and Outgoing (OG) calls made from/to all its trunks and extensions. To obtain SMDR as a report, you
must enable SMDR Storage, and set filters. See “Station Message Detail Recording (SMDR)” and “Station
Message Detail Recording–Storage” to know more.
To Next Page
Loading...
