Matrix ETERNITY NE System Manual 223
1. Click [+] SMDR Storage to expand options.
2. To store details of incoming calls landing on this SIP trunk, select the check box Store Incoming Calls.
Default: selected.
3. To store details of outgoing calls made from this SIP trunk, select the check box Store Outgoing Calls.
Default: selected.
4. Click Submit.
DSS Key Interface
This parameter determines what the system should do when an external called party in speech on this trunk is put
on Hold by an extension user by pressing a DSS key to dial another port.
For example, the DKP extension user on DKP1 port is in the middle of speech with an external party on a CO2.
If the extension user of DKP1 presses a DSS key to call another extension port, DKP2, two situations are possible,
depending on the DSS Key Interface you configure:
i. The external caller on CO2 will be played music-on-hold, and the user on DKP1 will hear Ring Back
Tone. The call will be placed on DKP2.
ii. The external caller on CO2 will be disconnected. DKP1 user will hear Ring Back Tone. The call will be
placed on DKP2.
1. Click [+] DSS Key Interface to expand options.
2. Select the radio button of the desired DSS Key Interface option:
• Disconnect current call when DKP user presses DSS key of other trunk, while in speech using
this trunk.
• Put current call on Hold, when DKP user presses DSS key of other trunk, while in speech using
this trunk. (Default).
3. Click Submit.
Cost Factor
Cost Factor is used for grading the cost of routing calls from a trunk for the purpose of least cost routing. See “Least
Cost Routing (LCR)”
To Next Page
Loading...
