Matrix ETERNITY NE System Manual 225
The default Time Schedule (start and end time) for each Time Zone Index is as follows:
If your service provider offers the same Pulse Rate for calling a number for the entire day, there is no need
to change the default Time Schedule. The system will follow Time Zone 1.
See “Call Cost Calculation (CCC)”
Call Budget
Configure this parameter if you want to control the cost of phone calls made from this trunk. See “Call Budget on
Trunk” to know more.
1. To enable call budget on the trunk, set Use Call Budget? to Yes. Default: No.
2. Define the call budget in terms of number of calls in the field Restrict outgoing calls if total number of
calls exceeds. Default: 9999 (in local currency)
3. Define the call budget in terms of amount in the field Restrict outgoing calls if total cost of the calls
exceeds. Default: 999999 (local currency).
4. Define the call budget in terms of duration in the field Restrict outgoing calls if total call duration
exceeds. Default: 999999 minutes
5. To have the system reset the Number of Calls/Amount/Minutes automatically on a particular date, select
the desired date from the Reset Call Budget on combo box as 1st to 31st of the every month.
The consumed Call Budget Amount/Minutes/Number of Calls can be reset from SE and SA Mode, referred
to as Manual Reset. Refer the feature description “Call Budget on Trunk”.
Time Zone Index Start Time End Time
T1 00:00 23:59
T2 00:00 23:59
T3 00:00 23:59
T4 00:00 23:59
To Next Page
Loading...
