40 Matrix ETERNITY NE System Manual
• When mounting the phone on the wall, detach the Foot Stand on the bottom of the phone.
• Fix two screws of appropriate diameter on the wall, ensuring that they are aligned with the Keyhole
Slots 1 and 2.
• Use wall plugs, if required, to fix the screws. Leave the screw heads protruding from the wall to fit
into the Keyholes.
• Now, mount the phone on the wall, with the screws fitting into the Keyhole slots.
• When you mount the phone on a desk, you can attach the Foot Stand in two ways as illustrated below.
Foot Stand attached at 20° Angle
Foot Stand attached at 45° Angle
If you attach the Foot Stand at 45°, the phone will be placed in an almost upright position on your
desk.
• Decide which of these positions would work for you best and accordingly attach the Foot Stand.
Pull out the Foot Stand.
Press down
to attach/detach
To Next Page
Loading...
