Matrix ETERNITY NE - Page 576

566 Matrix ETERNITY NE System Manual
• Disconnect DID Call, when dialed number is busy: when this flag is enabled, if the dialed extension
is found busy, the system will disconnect the DID call instead of routing it to the Operator. Default:
disabled.
• Disconnect DID call, when dialed number is not responding: when this flag is enabled the system,
if there is no reply from the landing destination extension(s), the system will disconnect the DID call
instead of routing it to the Operator. Default: disabled.
• Disconnect DID call, when caller does not dial any digit: when this flag is enabled, if the caller fails
to dial a digit within the DID Beeps Timer, the system will disconnect the DID call instead of routing it to
the Operator. Default: disabled.
See “System Parameters” for instructions.