Matrix ETERNITY NE System Manual 743
In the When Call Splitting is OFF, charge calls to field, select the desired extension you want to
charge the call to as Originating Extension or Terminating Extension.
• As the SMDR Outgoing call storage buffer is limited, you may limit the storage of calls to a certain
numbers only by configuring Store Calls made to numbers matching with.
You may configure as many as 250 numbers. The system will store records of outgoing calls made to
these numbers only.
ETERNITY uses the best match logic for storing these numbers. For example, if you configure 0 here,
the system will store all outgoing calls made to numbers starting with 0.
• Click Submit to save your Outgoing call storage filter settings.
• To configure storage filters for incoming calls, click SMDR Storage - Incoming Calls to expand,
• Select the Store Incoming Calls check box to enable storage of incoming calls as per the filters you
set. If incoming call storage is disabled, no incoming call will be stored.
• If you want incoming calls that exceed as certain duration to be stored, set the filter Store Calls with
speech duration more than (sec) to the desired duration. All calls with duration greater than this
value, will be stored.
• If you want incoming calls that remain unanswered for certain duration to be stored, set the filter Store
Calls remaining un-answered for more than (sec) to the desired duration. All calls with duration
greater than this value, will be stored.
To Next Page
Loading...
