status bri-port
Issue 4 May 2002
8-311555-233-123
status bri-port
This command displays the service state, maintenance state and layer 1 state of
an ISDN-BRI port. This form also displays information about point-to-point
signaling links that transport over the port.
Output
The following example shows the output from status bri-port 1c1701.
Field descriptions
Action/Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
status bri-port location
print
Physical location: PCsspp
Report sent to printer.
Examples:
status bri-port 1c0701
status bri-port 1c0701 print
init
inads
craft
cust
nms
browse
none none
Port
ISDN-BRI port address.
Service
State
ISDN-BRI port is “in-service” or “out-of-service.”
Maintenance
Busy
Specifies if maintenance testing is executing on the ISDN-BRI port
(y/n)
status bri-port 1c1701 Page 1 of 1 SPE A
STATUS BRI-PORT
Port: 01C1701
Service State: in-service
Maintenance Busy?: no
Layer 1 State: activated
TEI Value Layer2 State Endpt Extension Endpt SPID Service SPID?
Link1 64 13-established 1010 1010
Link2
Link3
To Next Page
Loading...
