SVC-SLOT (Service Slot)
Issue 4 May 2002
10-1569 555-233-123
SVC-SLOT (Service Slot)
The Service Slot maintenance object is used to detect when an invalid circuit pack
is inserted into a SERVICE slot. The SERVICE slot is the leftmost slot in the
J58890BB Port Carrier. It is identified as circuit pack slot location “00” in all
commands, field entries, and displays used by the system administrator and the
service technician.
This slot does not provide tip and ring connectivity to the wall field. Therefore, only
the following circuit pack types are allowed in the slot:
■ Call Classifier (TN744)
■ Integrated Announcement (TN750)
■ Maintenance/Test (TN771C)
■ Speech Synthesizer (TN725B)
■ Tone Detector (TN748C)
A MINOR alarm is generated against the Service Slot maintenance object when a
circuit pack of a type other than that included in the previous list is inserted into a
SERVICE slot.
The Service Slot maintenance object name is used instead of the maintenance
object name for the illegal circuit pack to prevent any attempt to assign a port to
an illegal circuit pack that is physically inserted into the SERVICE slot.
MO Name (in
Alarm Log)
Alarm
Level Initial Command to Run Full Name of MO
SVC-SLOT MINOR none Service Slot
To Next Page
Loading...
