Maintenance Object Repair Procedures
555-233-123
10-1468 Issue 4 May 2002
S-SYN-BD (Speech Synthesis Circuit
Pack)
Refer to XXX-BD (Common Port Circuit Pack) Maintenance documentation for
circuit pack level errors. See also S-SYN-PT (Speech Synthesis Port)
Maintenance documentation for related port information.
MO Name (in
Alarm Log)
Alarm
Level
Initial Command to
Run
1
1 Where P is the port network number (1 for PPN and 2 for EPN); C is the carrier
designation (for example, A, B, C, D, or E); and SS is the address of the slot in the
carrier where the circuit pack is located (for example, 01, 02, ..., etc.).
Full Name of MO
S-SYN-BD MIN test board PCSS sh Speech Synthesis Circuit Pack
S-SYN-BD WRN test board PCSS sh Speech Synthesis Circuit Pack
To Next Page
Loading...
