Avaya Definity SI - Cancel Hardware-Group; Change Circuit-Packs

cancel hardware-group
Issue 4 May 2002
8-25555-233-123
cancel hardware-group
This command temporarily or permanently aborts the execution of a test
hardware-group command. To resume testing, enter resume hardware-group
or test hardware group.
Feature Interactions
■ Scheduled and Periodic Maintenance
When the test hardware-group command is entered, all activity related to
scheduled background maintenance, periodic background maintenance,
and data audits suspends for the duration of the test hardware-group
command. All activity related to scheduled background maintenance,
periodic background maintenance, and data audits restarts if the test
hardware-group command is canceled.
■ Status Hardware-group
The status hardware-group command displays the state of a canceled
test hardware-group command as canceled.
change circuit-packs
This command allows users to administer circuit packs that are inserted into the
system port, expansion control, and switch node carriers. It is used to configure
the system when circuit packs are not physically inserted.
Action/Object Qualifier
Qualifier
Description Logins Defaults
Feature
Inter-
actions
cancel
hardware-group
Examples:
cancel
hardware-group
init
inads
none See
below
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
change
circuit-packs
cabinet
number
Cabinet number of the
circuit packs
Examples:
change circuit-packs 1
change circuit-packs 2
init
inads
craft
cust
nms
1 (one) none