status station
Issue 4 May 2002
8-385555-233-123
Field descriptions
status station
This command displays the internal software state information for diagnosis and
to help locate the facilities to which the station is communicating.
Link State
Operational mode of the link:
up: the link is administered and a call is setup between the switch
and the system printer.
down: the link is administered, but a call is not setup between the
switch and the system printer.
extension not administered: the link (no system
printer extension) is not administered
Number of
Retries
Number of times the switch has tried to set up the link since a
request to set up the link was received (1-999); if more than 999
retries have occurred,
999 still displays. (This field displays only if
the
Link State: field is down.)
Maintenance
Busy
Whether any maintenance testing is being performed on the
system printer link:
yes and no: system printer link is administered
blank: system printer link is not administered.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
status
station
extension
print
Station extension (per dial-plan)
Report sent to printer
Examples:
status station 10020
status station 83277
status station 83277 print
init
inads
craft
cust
browse
none none
To Next Page
Loading...
