Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-386 Issue 4 May 2002
Output
The following example shows the output for the status station 1002 command.
Field descriptions
Administered
Type
Administered station type
Connected
Type
The actual type of phone connected to this port, if the
information is available.
Extension
Station or attendant extension
Port
Port location: cabinet-carrier-slot-circuit
Call Park
Whether the station has a call parked (yes or no)
Ring Cut Off
Activated
Whether ring cut off is activated (yes or no)
CF
Destination
Ext
Call forwarding destination extension, if any.
Message
Waiting
Whether there is a message waiting for the station. “AP-SPE”,
“AUDIX”, “PMS” or blank if no messages are waiting.
Connected
Ports
Port locations of the facilities to which the station is connected:
cabinet-carrier-slot-circuit
Agent Logged
In
Displays (underneath) the hunt groups (up to 3) that the agent
is logged into
status station 1002
GENERAL STATUS
Administered Type: 7405D Service State: in-service/on-hook
Connected Type: N/A Download Status: Pending
Extension: 1002 Maintenance Busy? no
Port: 01C0702 SAC Activated? no
Call Parked? no User Cntrl Restr: none
Ring Cut Off Act? no Group Cntrl Restr: none
CF Destination Ext:
Message Waiting:
Connected Ports:
ACD STATUS HOSPITALITY STATUS
Agent Logged In Work Mode AWU Call At:
User DND: not activated
Group DND: not activated
Room Status: non-guest room
To Next Page
Loading...
