status logins
Issue 4 May 2002
8-377555-233-123
status logins
status logins [print]
This command will display information about all of the users that are currently
logged into the system. This information will contain their login names, location of
physical access, and their currently executing command.
The screen does not automatically update, and is a reflection of the system at the
time the request was made. Users may have logged off, or on, or the command
may have finished executing while the information is being displayed. These
updates will not be reflected until the next execution of the command.
The command will take a snapshot of the commands that the users on the system
are currently executing. Because of timing, the command could be terminated by
the time this command finishes displaying the list (i.e. the active command may
not be accurate).
The following is an example of the results of the status logins command:
status logins SPE B
USER LOGIN INFORMATION
Login Type Location Aux Active Command SessionID
terrym SYS-PORT 08A1408 01C1901 3
snmp SYS-PORT 04A1907 06D1208 5
terrym SYS-PORT 06B0705 09E1201 4
snmp SYS-PORT 04A1904 07E1708 2
*terrym SYSAM-LCL 01B 1 stat logins 6
terrym IP 07E0802 192.11.128.148 stat logins 7
To Next Page
Loading...
