Maintenance Commands and Trouble-Clearing Aids
555-233-123
8-58 Issue 4 May 2002
display cabinet
This command displays the cabinet description and location and the carrier
description for a selected cabinet number.
Output
The example below shows the output for the display cabinet 1.
Action/
Object Qualifier Qualifier Description Logins Defaults
Feature
Interactions
display
cabinet
print
schedule
Report sent to printer
Command is validated and
then a scheduling form
displays to schedule
execution of the command.
The command is then
placed in the command
queue and is executed at
the specified time. The
information displayed by the
command is sent to the
system printer instead of the
screen.
1
Examples:
display cabinet 1
1 Refer to the Report Scheduler and System Printer feature specification for more details.
init
inads
craft
cust
rcust
none none
display cabinet 1
CABINET
CABINET Description
Cabinet: 1
Cabinet Layout: five-carrier
Cabinet Type: processor
Number of Portnetworks: 1
Room: 30n46
Floor: first
Building: main
CARRIER Description
Carrier Carrier Type Number
C port PN 01
B not-used PN 01
A processor PN 01
X Fan
D not-used PN 01
E switch-node SN 01
Command Successfully Completed
To Next Page
Loading...
